Optical Power Meter

Product Details:

Our company has achieved widespread recognition for providing Mini-Designed Optical Power Meter to the clients. Offered product is precisely developed and reasonable in rate.

Mini-Designed Optical Power Meter is a self-developed test instrument which is widely used for installation, operation and maintenance of fiber-optic network. TL520 can test optical power within the range of 800~1700nm wave length. There are 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, six calibrated wavelength.

WPT 830-A:

• Measurement range: -70~+10dBm calibrated wavelength 850nm 1300nm 1310nm 1490nm 1550nm 1625nm

WPT 830-C:

• Measurement range: -50~+26dBm calibrated wavelength 850nm 1300nm 1310nm 1490nm 1550nm 1625nm

Product Details:

5 in 1 
1. Fast and Accurate: This optical power meter can do fast measurements without waiting and is directly available. Covers most of the needs of communication engineering maintenance and net testing.2. 10 Wavelengths: This optical multimeter has 10 wavelengths, 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625, 1650nm, and SC FC ST adapters.3. Relative Power Calculation: Our optical multimeter can do relative power calculation and calibration function, so that your measurement is more accurate.4. Low Battery Consumption: Our optical power meter has low battery consumption, it is rechargeable type and can achieve 120 hours of continuous operation.5. Sensitive Chip: This optical power meter has a sensitive chip and sturdy internal structure, small size and light weight, very convenient to carry.

Product Details:

Suitable for 0.25/0.9/2.0/3.0mm Easy test directly,convenient and efficient. Small and Practical. No need to replace the chucks  Identifies 3 common test tones. Identifies dominant traffic direction, audible alarm.  Very easy to operate. Approximate core power reading. Low false detection & inser-tion loss. Battery low indication.

Product Characteristics:-

• Suitable for 0.25/0.9/2.0/3.0mm
•   Identififies dominant traffic. Easy test directly, convenient and audible alarm. efficient
•   Approximate core power 
• Identififies 3 common test tones(270Hz, 1kHz, 2kHz). 
• Low false detection & ins
•   Small and Practical. No need to replace the chucks
•   Very easy to operate. Replace the chucks. 
• Battery lower power indication.
•  Signal direction: left or right LED

Product Details:

Model NO Measurement range dBm Wavelength range  nm Calibrated wavelength Detector Accuracy Resolution Working temperature Storage temperature Relative humidity connector Power supply DC power supply Working hours Weight(g) Dimension(mm) 800 1650 850nm 1300nm 1310nm 1490nm 1550nm 1625nm other wavelength will be on request Inga As <±3%  10dBm 22 Linearity 0.1% Non-linearity 0.01dBm -10 50  -20 +70  90% 30 Two types: 1. FC/PC connector; changeable FC/PC SC/PC( ST and LC as Optional) 3pcs AAA batteries Optional accessory which require special order Support wide range power input work (AC 90-240) >120 hours without backlight 160g 130×63×2

Product Details:

Ready when you need it - ultra-high reliability and
high availability
Dependable, German design
Designed with outdoor environment in mind
Low power consumption for extended continuous use
Instant On – no boot time
Easy to use
High-Visibility backlit graphical display with
context-sensitive softkey
No setup ‘OptiChek’ measurement mode
FEATURES
1 nm incremental wavelength settings
Universal optical interface supports all 2.5 mm
with option for 1.25 mm connectors
Fiber Tracing – detecting optical light source tone(s)
APPLICATIONS
Measuring optical power levels and link insertion loss
for both Single mode and Multimode networks
Network Build and Maintenance for
Enterprise/LAN
Access and Metro (LAN/WAN)
FTTx (e.g. Home/Antenna)
Auto-λ, Multi-λ mode
Automatic upload of results via VIAVI Mobile
Tech application
Storage for > 1000 test results and PC download capability
Bluetooth low energy connectivity to the
VIAVI Mobile Tech App
3-year recalibration period
Standard and high-power level tests

Product Details:

Optical power Meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers.

It features ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio.

Features

·       User self calibration function

·       Comfortable LCD display and optional backlight

·       LCD display supports night operation

·       Power measurements in dBm or mw and insertion loss in dB

·       Low battery consumption, more than 240 hours continual operation time

Product Details:

Features:

•     Self calibration by user himself
•     Rechargeable lithium battery supports continuous work for up to 48 hours.
•     Linear indicators (mW) and non-linear indicators (dBm) display in one screen
•     UniqueFC/SC/ST universal port (see Figures 1, 2), no complex conversion
•    Optional auto power-off ability
•     BacklightON/OFF

Application:-

• Maintenance in Telecom
•  Other Fiber Optic Measurements
•  Maintenance CATV
•  Test Lab of optical fibers

Product Details:

Features:-

• User self calibration function
•  Comfortable LCD display and optional backlight
•  LCD display supports night operation
•  Power measurements in dBm or mw and insertion loss in dB
•  Low battery consumption, more than 240 hours continual operation time
• For three 1.5V alkaline batteries Optional 10 minutes Auto-off function

Application:-

• Maintenance in Telecom
•  Other Fiber Optic Measurements
•  Maintenance CATV
•  Test Lab of optical fibers

Product Details:

addition to providing a full day of battery-operated field use,
the SmartClass Fiber OLP-85 and -85P are perfect for fixed
installations in central offices, production environments, and for
laboratory workbenches because they can operate via mains or
be remotely controlled via USB 2.0 and Ethernet.
BENEFITS
Complete jobs faster, correctly, and on time—the first
time with uniquely integrated fiber inspection and test
with auto pass/fail analysis
Battery-operated field-portable optical power meters
with an 800 to 1700 nm measurement wavelength
range and high accuracy over an ultra-wide 100 dB
dynamic range
The OLP-85 and -85P are compatible with the P5000i digital
analysis microscope so users can check fiber end-face quality
and get pass/fail acceptance results with one button push.
The OLP-85P features an integrated patch-cord microscope (PCM)
for added value and improved workflow efficiency.
Combining the VIAVI Solutions® OLS-85 optical light source
and OLP-85 and -85P optical power meters provides the greatest
functionality, and automated tests avoid handling errors and
speed testing. Automatic functions, such as auto-lambda and
multi-lambda test, enable users to receive information about
emitted wavelengths, automatically set wavelengths on the
compatible power meter, and accurately measure up to four
wavelengths simultaneously. Users can also easily save test
results (power, loss, fiber inspection) with real-time stamps on
the OLP-85 and -85P to generate comprehensive certification
reports.
3.5-in color touch screen with integrated stylus
Automated pass/fail fiber inspection analysis with the
optional P5000i microscope, also available with
integrated PCM
Individual threshold settings for power and loss
pass/fail analysis
Onboard fiber inspection and test results storage with
time stamp
Data transfer and remote control via USB, Ethernet or
optional WiFi connection
Auto-lambda and multi-lambda test functions
communicate with VIAVI light sources
In-service loss test option
Rugged, weather-proof design
SmartPowerOn functionality for instantaneous power o

Product Details:

VIAVI Solutions OLP-39 TruePON Testers quickly,
easily, and conveniently measure power levels
and loss in fiber/FTTx networks, plus G/XGS-PON
PON-ID data analysis (TruePON). Easy-to-use for
technicians in all conditions, the SmartPocket V2
offers a dedicated and cost-optimized solution
for testing and troubleshooting fiber/PON
services in the field and fits perfectly in your
pocket. The smart and rugged OLP-39 also
includes unprecedented data storage capacity
supported by result downloads to a PC.
BENEFITS
Ensures correct OLT port connectivity for first time
install success (based on PON-ID)
FEATURES
APPLICATIONS
Minimise activation delays and meet targets for
installsper day
Reduce fault escalations and troubleshooting expenses
Avoid install abandonments and early life failures
due to borderline install

Product Details:

Features:

• Self calibration by user himself
• Rechargeable lithium battery supports continuous work for up to 48 hours.
• Linear indicators (mW) and non-linear indicators (dBm) display in one screen
• UniqueFC/SC/ST universal port (see Figures 1, 2), no complex conversion
• Optional auto power-off ability
• Backlight ON/OFF

Product Details:

Features

  Added Network Cable Test
  Accurately test whether a single network cable transmits signals normally
  Self Calibration
  Set the Auto Off
  Wavelength Memory function after turn off the tester
  High Accuracy, high ,High sensitivity, high linearity
  Stable VFL Output
  USB Charge port
  FC,SC Connector
  18650Li-ion Battery
  Lower power consumption design, long standby time
  Rubber Out shell, increased the protective properties for field work
  RJ45 Network tester ( Optional)

Application


 Maintain telecommunications
 Maintenance CATV
 Test Lab of Fiber Optic
 Optical fiber sensors
Specification 

Additional Information:

• Item Code: 1236
• Production Capacity: 100
• Delivery Time: READY STOCK

Product Details:

Features:

• Self Calibration
• Self Auto Off
• High Accuracy, high ,High sensitivity, high linearity
• Stable VFL Output
• Set the REF Value
• Real-time display of the power consumption
• Interchangeable connectors: FC/ SC
• Rubber Out shell, increased the protective properties for field work 

Application:-

• Maintenance in Telecom
•  Maintenance CATV
•  Test Lab of optical fibers
•  Other Fiber Optic Measurements

Additional Information:

• Item Code: 840
• Production Capacity: 1
• Delivery Time: 1
• Packaging Details: box

Product Details:

Model NO Measurement range dBm Wavelength range  nm Calibrated wavelength Detector Accuracy Resolution Working temperature Storage temperature Relative humidity connector Power supply DC power supply Working hours Weight(g) Dimension(mm) 800 1650 850nm 1300nm 1310nm 1490nm 1550nm 1625nm other wavelength will be on request Inga As <±3%  10dBm 22 Linearity 0.1% Non-linearity 0.01dBm -10 50  -20 +70  90% 30 Two types: 1. FC/PC connector; changeable FC/PC SC/PC( ST and LC as Optional)2AAA batteries Optional accessory which require special

Additional Information:

• Delivery Time: 3 TO 4
• Packaging Details: BOX

Product Details:

PON Power Meter (pon test instrument) is specially designed for PON network construction and maintenance which can be connected between OLT and ONT. The voice, data, video signal (1310/1490/1550) online can be measured synchronously and optical power value (1310/1490/1550) can be displayed with this meter. It’s a useful site test tool for the engineers of PON network and maintenance operators.

Main Features :

• Handheld, easy to operate 
• Can test 3 wavelengths’ power of PON system synchronously: 1310nm, 1490nm, 1550nm, 
• Can test the burst mode signal of 1310nm
• True color screen
• Friendly operation interface, human message management and operation function
• Supply 10 groups of threshold values for operator’s choice, analyze and display pass and fail status
• Relative value choice and edit function
• Can set the threshold value, upload data, and calibrate wavelength through management software
• Auto shut off (according to set value)
• Auto backlight off(according to set value)
• 6600mAh Lithium battery
• Power saving design (Low voltage self check and power off)
• Real-time clock display

Product Details:

This kind calibration type optical power meter is for handheld installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design

Features:

• It can experiment at Voice, data and video signal synchronous measurement and display on BPON/EPON/GPON.
• Providing simultaneous measurement for all three wavelengths on the fiber (1490nm, 1550nm,1310nm )
• Used in Burst mode measurement of 1310nm upstream.
• Use the software connect with PC, setting the threshold, data transfer, and calibration the ave length.
• Optional Chinese/English display.
• Offers up to 10 different threshold sets in total,Three status LEDs represent different optical signal conditions of Pass, Warn and Fail respectively.
• 10 minutes Auto-off function can be activated or deactivated
• Good key design,high sensitivity, greatly reducing the volume and weight of the tester.
• Different models corresponding to different function, according to own use to choose .

Product Details:

This type of Handheld Fiber Optical Power Meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. Application Telecom Maintenance CCTV Maintenance Comprehensive cable construction system Optical instruments research and development Optical communication education and lab testing Other optical project Features Supports 6 wavelength Testing Auto-off function with Backlight self calibration 48 hours super long standby timesimple interface support sc/fc/st interface working hour over 8 hours without charging.

Product Details:

Pocket-Sized Power Meters for All Kinds of Applications Easy-to-use for technicians at any skill level, SmartPocket optical power meters complement Viavi optical light sources for insertion loss and continuity testing in both multimode and single-mode networks. They offer a dedicated and cost-optimized solution for testing and troubleshooting fiber in the field with: Intuitive, one-button operation Automatic wavelength recognition A large, sharp display that simultaneously shows relevant results and settings The small and rugged OLP-3x also includes unprecedented data storage capacity and downloads results to a PC with a micro USB port. The OLP-34 is optimized for LAN/WAN access and enterprise networks and multimode or singlemode applications ??? The OLP-35 is optimized for standard telecommunication network applications The OLP-38 is a higher-power (+26 dBm) version for CATV (with analog RF transmission) or amplified DWDM systems applications

Key Benefits:- 

• Cost-effective, rugged high-performance solution
• 3-year recalibration period
• 1 nm incremental universal wavelength settings
• Universal optical interface supports all 2.5 mm with an option to support 1.25 mm connectors
• Auto wavelength detection and TwinTest mode
• Internal data storage and PC download capability
• Quick start operation eliminates warm-up

 Applications:- 

• Measuring optical power levels and link insertion loss
•   Enterprise LAN networks with 850/ 1300 nm multimode wavelengths capability
•   Test access and metro (LAN/WAN) networks in multimode and single-mode
•   Standard and high-power level tests for use in telecom.

Product Details:

visual fault locator 10km for fibre detecting any breakage in wire through laser lightFeatures:-

• MQW LD optical source
• Operating mode: CW and GLINT
• FC, SC, ST General interface
•  Long inspection distance
•  Steady power output
•  Sturdy and durable shell 
• Pen pattern design, convenient for use and carry

Function:-

• Locate the fiber failure, such as fracture and bend
•  Failure inspection in OTDR blind zone
•  Fiber recognition from head face to end face
•  Mechanical transition point optimization 

Application:-

• Telecom, CATV project
•  PDS construction and maintenance
•  Optical component manufacture and research
•  Other fiber project

Additional Information:

• Delivery Time: 3-4

Product Details:

A family of pocket-sized and low-cost optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks. VIAVI Smart Pocket Optical Power Meters (OLP-34, OLP-35, and OLP-38) offer an excellent price/performance ratio in a rugged and pocket-sized housing for straightforward use in the field. Mainly used to measure optical power level (dBm) in premises, telco, or CATV fiber optic networks, they also can be combined with LED (OLS-34/OLS-36) or laser light sources (OLS-35/OLS-36) for insertion loss measurement.Highlights:Rugged and pocket-sized designLarge display combined with an easy-to-use interfaceAuto-wavelength recognition function for saving test time and error-free testingInternal data storage (100 results)Report generation with OFS-355 softwareApplications:The OLP-34 (Ge) is dedicated to LAN/WAN Access and Enterprise multimode or single mode applications.The OLP-35 (InGaAs) covers all standard singlemode Telecommunication networks including Passive Optical Networks (PON)The OLP-38 (Filtered InGaAs) is the higher power (+26dBm) version for any CATV (with Analog RF transmission), or amplified DWDM system applicationsKey Features:Extra long battery lifetime (>200 hours).3-years calibration periodUniversal optical interface for all 2.5 mm / 1.25 mm connectorIndividually settable wavelengths per 1 nm stepMicro USB interface for power supply or data transferCan be part of the SmartPocket Optical Test Kits