Cable Route Locator

510 MasterSPECIFICATIONActive Frequency 26 250 Гц ± 12 Гц6562,5 ± 1 Hz2187,5 ± 1 Hz273,5 ± 0,5 HzFrequency mode "Frendly frequency Hz xxx" 200-35000 HzBandwidth Amplitude –3 dB (≤)for frequency 26250 Hz 150 Hzfor frequency 6562,5 Hz 45 Hzfor frequency 2187,5 Hz 15 Hzfor frequency 273,5 Hz 2,5 HzDepth 6 mDepth Measurement Accuracy ±5%+10 cmTrace location accuracy 10 cmTrace locating of insulation interruption with transitional resistance10 – 100 kOhmSpectrum Frequency Range 10  26 000 HzBattery life (continuous operation, when using the battery 2100mAh) 13 hBattery Type 4-Ni-Mh АА type.Charging Time (≤) 4 hDimensions 257х88х685 mmWeight (with the battery) 1,9 kg

Additional Information:

• Item Code: EFSD4VGDV
• Minimum Order Quantity: 1 Piece
• Production Capacity: 1
• Delivery Time: 1
• Packaging Details: NA

Product Details:

Trace-locator 510 Master was carefully designed to help with:

• Trace searching, verifying the underground and open cable lines (open transmission lines) and power cables; metal cords and pipelines (water-, oil- and gas pipelines); supply pipelines that have metallic coat or metallic conductors;
• Control the position, direction, depth and signal current flowing underground communication and localization places open or short circuit;
• Control the direction of the signal to determine its cable communications in places of convergence or bundle of cables;
• Search, position control and determine the depth route power cables with a current of industrial frequency (50 Hz); race-searching in wideband mode from 200 - 26 000 Hz;
• Trace-searching and controlling of received frequencies in wideband mode (spectrum);
• Fault localization shells copper cable lines amplitude and phase (contactless) methods;
• Depth measurement and signal circuit with one-time record in the file; In active mode the 510 Master allows you to verify 4-frequency signal 273 Hz, 2 187,5 Hz, 6 562,5 Hz, 26 250 Hz and could be used as a unit with Signal current source MK 510. Also, at any frequency in the range from 200 to 35 000 Hz with the use of another Signal current source. In passive mode – without using a Signal current source – Trace-locator could be used as a controller of received frequencies and for trace-searching of power cables, trace-locating of noisy wires, massive metallic supply lines, and supply lines with metallic coating (pipelines, ropes, etc.). The Trace-Locator is power supplied by 4-Ni-Mh AA-type batteries. This provides 13-hour continuous work of the device. Trace-indication could be done visually and with acoustic reception signal (using headphones and built-in emitter). 
• 510 MASTER devices are equipped by the dynamic low temperature LCD (down to -10 C) or OLED (down to -40 C)
• Master version displays the map of investigated district and cable location. Such mode is called «Cable map» and contains a clear graphical information, which is very convenient for quick locating of the trace. The arrow is used to control the “friend or foe” 
• Spectrum – energie spectrum for the power cable locating without generator; broadband spectrum for pipes and underground communications locating with «life sound» 
• 2F – faults locating by double-frequencies amplutude method 

Transmitter MK 510

• With GSM remote control (option)
• Build-in accumulator for the 8 hours of continuous working
• Build-in inductor for contactless connection
• Auto matching with the line
• Auto tunning of the power
• Working on two frequencies simultaneously
• The user can set any frequency 200 Hz – 35 kHz

Additional Information:

• Item Code: 05